FotS

amods.zip

This module is part of the original MMBasic library. It is reproduced here with kind permission of Hugh Buckle and Geoff Graham. Be aware it may reference functionality which has changed or is deprecated in the latest versions of MMBasic.

Arcade: Arcade game where you have to shoot enemies until you die 3 times. It shows how to use multi-sprite enemies, audio modules as sound effects and ADC input for moving your ship Right/Left with a potentiometer + a Button to fire.

ARCATST.BAS:

'Arcade game test for Colour Maximite v4.0
'Fabrice Muller 2012
'All music modules have to be copied to a:
'The sprites are read from b:
'Joystick connections are :
'Pin 2  = 10Kohm Potentiometer
'
'                Pin 2
'                  |
'                  |
'                /   \
' +3v3 ----------| o |---------- GND
'                \___/
'
'         10Kohm Potentiometer
'
'
'Pin 15 = Button connected to GND , 10Kohm pullup resistor to pin 15
'
'                                    __|__
'
'               10 Kohm              |   |
' +3v3 ---------/\/\/\/\-----|-------|   |-------- GND
'                            |
'                            |       Button
'                          Pin 15
'
'All arrays start at index 1
Option Base 1
'Erase all variables values from memory
Clear
'Load the Sprites
Drive "b:"
Sprite Load "arcade01.spr"
Drive "a:"
'Arrays declaration
Dim ShootSpr(5)
Dim ShowShoot(5)
Dim ShootPos(5,2)
Dim EnnemySpr(10)
Dim EnnemyPos(10,2)
Dim EnnemyShow(10)
Dim EnnemyDir(10)
Dim EnnemySpeed(10)
Dim EnnemyKilled(10)
Dim EnnemyShootSpr(10)
Dim EnnemyShootPos(10,2)
Dim EnnemyShowShoot(10)
Dim Sprite_to_Show(26)
Dim Cx(26)
Dim Cy(26)
'Main ship sprite number is 1
ShipSpr = 1
'Global Variables declaration
Max_Shoot = 5
Max_Ennemy = 10
Max_Ennemy_Shoot = 10
Max_Sprite = 26
Shoot_Speed = -5
Ennemy_Shoot_Speed = 5
SpriteFlip = 0
OutsideX = 0
OutsideY = 0
ShipX = 0
ShipY = 0
Audio_is_playing = 0
Fire = 0
Lives = 0
Score = 0
'Joystick declaration
'Pin 2 as ADC input for a 10Kohm potentiometer
SetPin 2,1
'PIN 15 = Fire Button 1
SetPin 15,2
'Initialise the sprites and screen
Initialise
'General game loop
Do While 1
 'Here we check if we fire every 300mS
 If (Timer Mod 200) >= 100 Then
  fire = Check_Fire(15)
  'Put a new fire if possible
  If fire = 0 Then Put_New_Fire
 EndIf
 'Here we move the Ship
 ShipX = Pot_Read(2)
 'Here we move all Ennemys
 Move_Ennemy
 'Here we move the Shoots we have fired
 Move_Shoot
 'Here we move the Ennemys Shoots they have fired
 Move_Ennemy_Shoot
 'Here we check if we have kill a Ennemy
 Check_Ennemy_Dead
 'Here we Check if the Ennemys kill us
 Check_Player_Dead
 'We Random the Ennemy Shoots
 If Int(Rnd * 100) > 80 Then Put_New_Enenmy_Fire
 'Here we redraw all Sprites every 100mS
 Show_All_Sprites
 Print @(60,0) "Lives : ";Lives;" "
 Print @(150,0) "Score : ";Score;" "
Loop

Sub Initialise
 Local a
 'Set all the Sprite first
 For a = 1 To Max_Shoot
  'Shoot Sprites start at 2
  ShootSpr(a) = a + 1
  ShowShoot(a) = 0
 Next a
 For a = 1 To Max_Ennemy
  'Ennemy Sprites start at 7
  EnnemySpr(a) = a + 6
  'Don't show the ennemys now
  EnnemyShow(a) = 1
  'Reset Ennemys Directions
  EnnemyDir(a) = 0
  'Reset the Ennemys Speed
  EnnemySpeed(a) = 2
  'Put all Ennemy as not Killed
  EnnemyKilled(a) = 0
 Next a
 For a = 1 To Max_Ennemy_Shoot
  'Ennemy Shoot Sprites start at 17
  EnnemyShootSpr(a) = a + 16
  EnnemyShowShoot(a) = 0
 Next a
 SpriteFlip = 0
 'Set Lives ans Score
 Lives = 3
 Score = 0
 ' Set the graphics mode
 Mode 4
 'Erase the screen
 Cls
 'Wait for a key to start
 Print @(80 , 100) "Press a key to start"
 Do While Inkey$ = "" : Loop
 Cls
 'Initialise the random number generator
 Randomize Timer
 'Place the ship
 ShipX = Pot_Read(2)
 ShipY = 198
 'Set the Ennemys Positions and directions
 For a = 1 To Max_Ennemy
  EnnemyPos(a,1) = Set_Ennemy_Pos_X(1)
  EnnemyPos(a,2) = Set_Ennemy_Pos_Y(1)
  EnnemyDir(a)   = Set_Ennemy_Dir(1)
  EnnemySpeed(a) = Set_Ennemy_Speed(1)
 Next a
 OutsideX = -20
 OutsideY = -20
 Start_All_Sprite
 'Reset the timer for the game loop
 Timer = 0
End Sub

Sub Start_All_Sprite
 'We start all sprite here outside the screen
 'for not have to look at on/off status
 'This improve the performance.
 'Sprite order:
 'Sprite 1
 Sprite On ShipSpr,OutsideX,OutsideY
 'Sprite 2 to 6
 For a = 1 To Max_Shoot
  Sprite On ShootSpr(a),OutsideX,OutsideY
 Next a
 'Sprite 7 to 16
 For a = 1 To Max_Ennemy
  Sprite On EnnemySpr(a),OutsideX,OutsideY
 Next a
 'Sprite 17 to 26
 For a = 1 To Max_Ennemy_Shoot
  Sprite On EnnemyShootSpr(a),OutsideX,OutsideY
 Next a
End Sub

Sub Show_All_Sprites
 'Here we show all sprite in respecting the
 'Order needed for the Sprite function
 'We record the Ship info
 Sprite_to_Show(ShipSpr) = ShipSpr
 Cx(ShipSpr) = ShipX
 Cy(ShipSpr) = ShipY
 'Check if Sprites have to be Moved or
 'pushed out of the screen
 For a = 1 To Max_Shoot
  If ShowShoot(a) = 1 Then
   Sprite_to_Show(ShootSpr(a)) = 1
   Cx(ShootSpr(a))=ShootPos(a,1)
   Cy(ShootSpr(a))=ShootPos(a,2)
  Else
   Sprite_to_Show(ShootSpr(a)) = 0
   Cx(ShootSpr(a))=OutsideX
   Cy(ShootSpr(a))=OutsideY
  EndIf
 Next a
 For a = 1 To Max_Ennemy
  If EnnemyShow(a) = 1 Then
   Sprite_to_Show(EnnemySpr(a)) = 1
   Cx(EnnemySpr(a))=EnnemyPos(a,1)
   Cy(EnnemySpr(a))=EnnemyPos(a,2)
  Else
   Sprite_to_Show(EnnemySpr(a)) = 0
   Cx(EnnemySpr(a))=OutsideX
   Cy(EnnemySpr(a))=OutsideY
  EndIf
 Next a
 For a = 1 To Max_Ennemy_Shoot
  If EnnemyShowShoot(a) = 1 Then
   Sprite_to_Show(EnnemyShootSpr(a)) = 1
   Cx(EnnemyShootSpr(a))=EnnemyShootPos(a,1)
   Cy(EnnemyShootSpr(a))=EnnemyShootPos(a,2)
  Else
   Sprite_to_Show(EnnemyShootSpr(a)) = 0
   Cx(EnnemyShootSpr(a))=OutsideX
   Cy(EnnemyShootSpr(a))=OutsideY
  EndIf
 Next a

 If SpriteFlip = 0 Then
  'Sprites was drawn 1st to last , we erase or move
  'then Last to 1st
  'Drawing Order was :
  'Ship
  'Shoot
  'Ennemy
  'Ennemy_Shoot
  '
  'Here we move the Sprite or put them out of the screen
  For a = Max_Sprite To 1 Step - 1
   Sprite Off a
  Next a
  For a = Max_Sprite To 1 Step - 1
   If Sprite_to_Show(a) = 0 Then
    Sprite On a,OutsideX,OutsideY
   Else
    Sprite On a,Cx(a),Cy(a)
   EndIf
  Next a
  SpriteFlip = 1
 Else
  'Sprites was drawn last to 1st , we erase or move
  'then 1st to last
  'Drawing Order was :
  'Ennemy_Shoot
  'Ennemy
  'Shoot
  'Ship
  '
  'Here we move the Sprite or put them out of the screen
  For a = 1 To Max_Sprite
    Sprite Off a
  Next a
  For a = 1 To Max_Sprite
   If Sprite_to_Show(a) = 0 Then
    Sprite On a,OutsideX,OutsideY
   Else
    Sprite On a,Cx(a),Cy(a)
   EndIf
  Next a
  SpriteFlip = 0
 EndIf
End Sub

Sub Move_Ennemy
 'Move all ennemy Ship
 Local a
 For a = 1 To Max_Ennemy
  If EnnemyShow(a) = 1 Then
   EnnemyPos(a,1) = EnnemyPos(a,1) + EnnemyDir(a)
   'We look if the Ennemy bump at a screen border
   'If so , we reverse his direction
   If EnnemyPos(a,1) < 1 Then EnnemyDir(a) = 1
   If EnnemyPos(a,1) > MM.HRes - 18 Then EnnemyDir(a) = -1
   'We made the Ennemy go down
   EnnemyPos(a,2) = EnnemyPos(a,2) + EnnemySpeed(a)
   'If the ennemy go outside the screen or if we kill
   'then we put it at new place
   If (EnnemyPos(a,2) >= (MM.VRes - 40)) Or (EnnemyKilled(a) = 1) Then
    EnnemyPos(a,1) = Set_Ennemy_Pos_X(1)
    EnnemyPos(a,2) = Set_Ennemy_Pos_Y(1)
    EnnemyDir(a)   = Set_Ennemy_Dir(1)
   EndIf
   'Update the score if we kill a Ennemy
   If EnnemyKilled(a) = 1 Then
    EnnemyKilled(a) = 0
       Score = Score + 10
   EndIf
  EndIf
 Next a
End Sub

Sub Move_Shoot
 'Move the player shoots
 Local a
 For a = 1 To Max_Shoot
  If ShowShoot(a) = 1 Then
   ShootPos(a,2) = ShootPos(a,2) + Shoot_Speed
   'If the Shoot go outside the screen we put it
   'as not showed
   If ShootPos(a,2) < 18 Then ShowShoot(a) = 0
  EndIf
 Next a
End Sub

Sub Move_Ennemy_Shoot
 'Move the ennemys shoots
 Local a
 For a = 1 To Max_Ennemy_Shoot
  If EnnemyShowShoot(a) = 1 Then
   EnnemyShootPos(a,2) = EnnemyShootPos(a,2) + Ennemy_Shoot_Speed
   'If the Shoot go outside the screen we put it
   'as not showed
   If EnnemyShootPos(a,2) >= MM.VRes Then EnnemyShowShoot(a) = 0
  EndIf
 Next a
End Sub

Sub Check_Ennemy_Dead
 'Check if we have kill one of the Ennemy
 Local a,b
 Local px,py
 For a = 1 To Max_Ennemy
  px = EnnemyPos(a,1) + 15
  py = EnnemyPos(a,2) + 15
  For b = 1 To Max_Shoot
   If ShowShoot(b) = 1 Then
    If (ShootPos(b,1) >= EnnemyPos(a,1)) And (ShootPos(b,1) <= px) Then
        If (ShootPos(b,2) >= EnnemyPos(a,2)) And (ShootPos(b,2) <= py) Then
         'We have killed this ennemy
         EnnemyKilled(a) = 1
         Score = Score + 10
         ShowShoot(b) = 0
               If Audio_is_playing = 1 Then
                PlayMOD stop
                PlayMOD "Explode.mod" , 6000
               Else
                PlayMOD "Explode.mod" , 6000
               EndIf
         Exit For
        EndIf
       EndIf
   EndIf
  Next b
 Next a
End Sub

Sub Check_Player_Dead
 'Check if the Ennemys kill us
 Local a,px,py
 px = ShipX + 15
 py = ShipY + 15
 For a = 1 To Max_Ennemy_Shoot
  If EnnemyShowShoot(a) = 1 Then
   If (EnnemyShootPos(a,1) >= ShipX) And (EnnemyShootPos(a,1) <= px) Then
    If (EnnemyShootPos(a,2) >= ShipY) And (EnnemyShootPos(a,2) <= py) Then
     'The Ennemy Kill us !
     '............... to continue ............
     Lives = Lives - 1
     If Lives = 0 Then
         Drive "b:"
         Print @(100,80) "Game Over"
         Print @(80,120) "press a key to restart"
         Do While Inkey$ = "" : Loop
      End
     Else
      Exit Sub
     EndIf
    EndIf
   EndIf
  EndIf
 Next a
End Sub

Sub Put_New_Fire
 'Here we check if we can add a new fire
 Local a
  For a = 1 To Max_Shoot
   If ShowShoot(a) = 0 Then
    'we can add a shoot
    'Record the the Actual Show Shoot status
    ShootPos(a,1) = ShipX + 6
    ShootPos(a,2) = ShipY - 8
    ShowShoot(a) = 1
       If Audio_is_playing = 1 Then
        PlayMOD stop
        PlayMOD "Shoot.mod" , 6000
       Else
        PlayMOD "Shoot.mod" , 6000
       EndIf
    Exit For
   EndIf
  Next a
End Sub

Sub Put_New_Enenmy_Fire
 'Here we check if the Ennemy can add a new fire
 Local a
 For a = 1 To Max_Ennemy_Shoot
   If EnnemyShowShoot(a) = 0 Then
    'Ennemy can add a shoot
    EnnemyShootPos(a,1) = EnnemyPos(a,1) + 6
    EnnemyShootPos(a,2) = EnnemyPos(a,2) + 16
    EnnemyShowShoot(a) = 1
    Exit For
   EndIf
 Next a
End Sub

Function Pot_Read(ADC_Pin)
 'Read the potentiometer value for place
 'the X coordinate from the Ship
 'ADC_Pin is the pin number we have define for ADC input
 Local CalcPot , tmppos
 CalcPot = 3 / MM.HRes
 tmppos = Int((Pin(ADC_Pin) -0.1) / CalcPot)
 If tmppos > (MM.HRes - 17) Then tmppos = MM.HRes - 17
 Pot_Read = tmppos
End Function

Function Check_Fire(Fire_Button)
 'Return the value from the Fire Button
 'Fire_Button is the pin number we have define as fire button
 Check_Fire = Pin(Fire_Button)
End Function

Function Set_Ennemy_Dir(dummy)
 'Return -1 or 1 for the Ennemy direction
 Local a
 a = 0
  Do While a = 0
   If (Int(Rnd * 100) + 1 ) > 50 Then
    a = 1
   Else
    a = -1
   EndIf
  Loop
  Set_Ennemy_Dir = a
End Function

Function Set_Ennemy_Pos_X(dummy)
 'Set Ennemy Pos X
  Set_Ennemy_Pos_X = Int(Rnd * (MM.HRes - 30)) + 15
End Function

Function Set_Ennemy_Pos_Y(dummy)
 'Set Ennemy Pos X
  Set_Ennemy_Pos_Y = Int(Rnd * 30) + 15
End Function

Function Set_Ennemy_Speed(dummy)
 'Set the Ennemy Speed in Y
 Set_Ennemy_Speed = Int(Rnd * 5) + 1
End Function